ZMR250 Skis

NOTICE: My printer does not print very accurately dimensioned parts. You may need to scale the part as needed.

These mount using the 2 small holes on the ZMR250 arms. You will need to drill the hole out slightly larger to accept a M3 screw. I used M3 x 12mm screws as that is what I had on hand, but shorter would be better.

I do not know if these affect the performance of the quad, so use at your own risk. I did do a quick test flight, but it was cold and windy so it probably is not the best test.
https://www.youtube.com/watch?v=Z-zuhu7NXjU