Zombie Hand Hueforge

Project: zombie hand.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #785c50 PLA Overture Brown Transmission Distance: 0.5 #857f03 PLA Overture Olive green Transmission Distance: 0.5 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 5 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Brown At layer #13 (1.12mm) swap to Olive green At layer #14 (1.2mm) swap to White for the rest.