Zombie with balloon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 108x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Kingroon Red Transmission Distance: 4.2 PLA BambuLab Basic Yellow Transmission Distance: 5.9 PLA Prusament Galaxy Green Transmission Distance: 3.2 PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to Galaxy Green At layer #26 (2.16mm) swap to Jade White for the rest.