Zoom H4n Wall Mount

I needed a way to mount a Zoom H4n permanently on the interior wall of a production truck, so I took a slice of restlessstudio's H4n holster to get the correct dimensions and then modeled out from there.

The mount is designed to print easily without supports. The wall bracket piece should be printed flat side down and the sleeve piece should be printed with the actual bottom (where the XLR connector holes are) flat against the build surface.

You will need four flat head M3 screws, each with a TOTAL LENGTH (not threaded length) of 8mm. These attach the sleeve to the wall bracket.

You will also need four screws to mount the bracket to the wall. The hole for these is 5mm, so they should be compatible with a variety of wood screws and drywall screws to do the mounting.