Zoro One Piece Hueforge

The most reliable partner, Roronoa Zoro! Project: Zoro_03_v2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 156x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.1 #00ae42 * PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 #fce300 * PLA BambuLab Basic Yellow Transmission Distance: 5.2 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5.8 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #c00d1e * PLA BambuLab Basic Red Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Yellow At layer #10 (0.88mm) swap to Jade White At layer #11 (0.96mm) swap to Black At layer #12 (1.04mm) swap to Cobalt Blue At l