100W Flashlight

Here are the files and the code for a 100W flashlight. The flashlight has an OLED display that shows the temperature of the heatsink, brightness, fan speed, battery voltage, and battery percentage. The fan are temperature-controlled and begin to run at a specified temperature.





About the code:

Everything works except the strobe light function that I wanted to add. Right now the strobe light switch (the small switch) works but I can only get it to turn on and off every second. The plan is to make it possible to adjust the frequency of the strobe light with the potentiometer and display the “Hz” on the display.





Here are the parts you need:

80 mm fan and heatsink:
https://www.aliexpress.com/item/32799938839.html?spm=a2g0s.8937460.0.0.67ed2e0eKrxKWG
or
https://www.aliexpress.com/item/32834284199.html?spm=a2g0s.8937460.0.0.67ed2e0eKrxKWG
or
https://www.aliexpress.com/item/32590832163.html?spm=a2g0s.8937460.0.0.67ed2e0eKrxKWG

100 W LED:
https://www.aliexpress.