Thingiverse
1x3x5
par kequals
62
Téléchargements
46
Likes
0
Makes
A 1x3x5 floppy cuboid. Each face can turn 180 degrees. This puzzle is not proportional, and 4 of the sides measure about 25mm instead of 19mm.
To make this puzzle, print each part by the number indicated on the filename:
* 1 Core
* 2 Outer Center
* 2 Long Edge
* 2 Center Edge
* 4 Short Edge
* 4 Corner
This puzzle requires 2 M3 screws that can be bought below:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 5x3 faces are standard 57mm 3x3 stickers. The 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.
To make this puzzle, print each part by the number indicated on the filename:
* 1 Core
* 2 Outer Center
* 2 Long Edge
* 2 Center Edge
* 4 Short Edge
* 4 Corner
This puzzle requires 2 M3 screws that can be bought below:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 5x3 faces are standard 57mm 3x3 stickers. The 1x5 and 1x3 faces measure about 19mm x 25mm, so you can cut stickers a bit smaller to fit them.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
