Thingiverse
Pillowed 1x3x5
by kequals
17
Downloads
12
Likes
0
Makes
WARNING: NOT YET PROTOTYPED. It has the same mechanism as my rectangular 1x3x5 though, so it should work.
A 1x3x5 floppy cuboid. Each face can turn 180 degrees. This puzzle is not proportional, and instead is pillowed.
To make this puzzle, print each part by the number indicated on the filename:
* 1 Core
* 2 Outer Center
* 2 Long Edge
* 2 Center Edge
* 4 Short Edge
* 4 Corner
This puzzle requires 2 M3 screws that can be bought below:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 1x3 and 1x5 faces are standard 57mm 3x3 stickers. The 3x5 faces are pillowed, but 3x3 stickers should probably work.
A 1x3x5 floppy cuboid. Each face can turn 180 degrees. This puzzle is not proportional, and instead is pillowed.
To make this puzzle, print each part by the number indicated on the filename:
* 1 Core
* 2 Outer Center
* 2 Long Edge
* 2 Center Edge
* 4 Short Edge
* 4 Corner
This puzzle requires 2 M3 screws that can be bought below:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers for the 1x3 and 1x5 faces are standard 57mm 3x3 stickers. The 3x5 faces are pillowed, but 3x3 stickers should probably work.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
