Zonestar to Bowden Mount System

This is a Zonestar to Bowden mount system.
I designed this after I stripped out the treads on my heat break and alumimum block that mounts to the Stepper Extruder motor.
Parts you need:
a kit from ebay for a remote servo MK2 kit, about $10.
Bowden Extruder
Teflon tubing, should come with kit but make sure.
This is a PERMANENT change. I had to cut the stainless stepper holder.
I cut at the bend to make one straight flat piece of stainless.
I used just the flat part of the stainless mount