DJI Mavic Pro Clone

von Steve Wagg · Full Multicopter Kit

0 Downloads

1.5k Likes

0 Makes

NOTE - UPDATED VERSION AVAILABLE ON http://diyrc.co.ukA couple of the photos are from the updated version (LED's at the back). Following on from my Inspire Clone I decided to have a go at the DJI Mavic.. This time it's a little different as I actually have one to measure and compare with so the clone is even better this time. I've tried to make this an easy print with no support required, all items are rotated ready to print. Please visit my website for updated versions, build logs and more.... Printed at 0.3 / 30% for speed, although it does seem very strong I'll drop this down to 0.2mm / 30% for final print.

drone quadcopter Quad clone DJI rcmodel Mavic MavicPro drone quadcopter Quad clone DJI rcmodel Mavic MavicPro

Kategorie

Full Multicopter Kit

Quelle

MyMiniFactory

Veröffentlicht

30.03.2017

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

keine Supports

Ohne Supports Einteilig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

DJI Mavic Pro Clone

Ähnliche Modelle

Zur Sammlung hinzufügen