3D-Printed Optical Bench - Lens Mount

If you want to build your own optical experiment, here is a lens holder/mount for different lens sizes. The mount consists of a universal holder with different inserts, depending on the lens diameter or frame. If your lens is already mounted in a 1 inch housing with SM1 thread, print out the SM1 insert. If you have a spare 30 mm or 1" lens, print one of the other inserts. If you have a different lens size, simply design your own insert and clamp it into the universal holder using an M4 screw. There is also an open lens mount where you can freely position a 30mm diameter lens (for quick change).

For further information check our website https://printedlabs.uni-bayreuth.de/en/modelldatenbank.

###***PrintedLabs***
Are you looking for exciting projects and creative experimentation in the ***STEM*** field? Then visit our website [**PrintedLabs.Uni-Bayreuth.de**](https://printedlabs.uni-bayreuth.de/en?target=_blank) and take a look around. Whether you are a ***teacher***, ***student*** or