Thingiverse
3D Printed Pendulum Clock
von StevePeterson
4.2k
Downloads
3.2k
Likes
34
Makes
This is a 3D printed pendulum clock with an 8-day runtime and an accuracy of around 1-2 minutes per week.
The primary goal while designing this clock was to make it functional as an accurate time keeper. It has a deadbeat escapement which remains accurate with variations in weight or power train friction. I wanted it to have a long runtime so it would still be keeping time if I was away for a few days. It took a few refinements and a few internal metal components to reduce friction enough to allow an 8-day runtime.
The gear outlines and escapement were designed using Gearotic with final cleanup in TurboCAD. All the parts were printed on a Prusa MK3 in PLA with a standard single color print head. Layer changes were used to print highlights on the dial. The total print time is just under 90 hours. Modern printers with input shaping will be significantly shorter.
The design was made to look as much like a traditional brass clock as possible. The gears were printed in gold an
The primary goal while designing this clock was to make it functional as an accurate time keeper. It has a deadbeat escapement which remains accurate with variations in weight or power train friction. I wanted it to have a long runtime so it would still be keeping time if I was away for a few days. It took a few refinements and a few internal metal components to reduce friction enough to allow an 8-day runtime.
The gear outlines and escapement were designed using Gearotic with final cleanup in TurboCAD. All the parts were printed on a Prusa MK3 in PLA with a standard single color print head. Layer changes were used to print highlights on the dial. The total print time is just under 90 hours. Modern printers with input shaping will be significantly shorter.
The design was made to look as much like a traditional brass clock as possible. The gears were printed in gold an
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
