Thingiverse
3D printer accuracy test
von MaxMuske
10
Downloads
2
Likes
0
Makes
A compatible remix of https://www.thingiverse.com/thing:3108748 to test the accuracy of your printer. (Maybe read the comments there.)
Should be a good test for 0.1, 0.2 and 0.4 nozzles.
The (square) dots and lines are from diameter 0.4mm up to 2.0mm in 0.4mm steps (from left to right). All distances between them are multiples of 0.4mm and all elements are aligned at multiples of 0.4mm. The bottom has a thickness of 0.6mm.
I found no solution to print the 0.4 fields (the left ones) with a 0.4 nozzle yet. Maybe not possible.
(Updated after some mismatches in the sizes and alignments.)
Should be a good test for 0.1, 0.2 and 0.4 nozzles.
The (square) dots and lines are from diameter 0.4mm up to 2.0mm in 0.4mm steps (from left to right). All distances between them are multiples of 0.4mm and all elements are aligned at multiples of 0.4mm. The bottom has a thickness of 0.6mm.
I found no solution to print the 0.4 fields (the left ones) with a 0.4 nozzle yet. Maybe not possible.
(Updated after some mismatches in the sizes and alignments.)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!