3D Scanner Head Unit Prototype 1

I've been developing fully automated 3D scanner. Up until recently it was operated using a $15 webcam. This is an updated prototype of my newest head unit. I've been developing multiple revisions to this since this model but I figured I'd share this model with people though in case they want to toy with it themselves. Aside from the pi (which it can run without) most of the devices are relatively cheap and cost under $130 dollars all together. All the bolts are 1/4 half inch hex cap screws that go into 1/4 threaded heat inserts.

A More detailed write-up can be found on my website at:

https://whyamisoawkward.com/?p=643

Current Parts Listed Below

ELP Synchronized Dual Lens Stereo Camera Model Number B083JSDD97 (Make sure you get the one WITHOUT lens distortion).

Benewake TFMini-S

Embedded Mega2560

Raspberry Pi 4 (8GB)

Inland Raspberry Pi 4 B Camera Webcam

a ton of 1/4 heat pressed threaded inserts (don’t judge it’s what I had!)

1/4 1inch hex cap bolts