3D Scanner Table

**Update 12/12/2016**

Added the "3D scan.zip"
It includes:
The Arduino Code
The Fritzing File
The Multi Camera IR Control library
The Accelstepper library (Can also be found here: http://www.airspayce.com/mikem/arduino/AccelStepper/)

For the moment the Arduino code i wrote works only with Nikon Cameras ( I tested with my D5500 without any problems)
If you have another camera, maybe you will need to make a little adaption, so take a look to the examples from the library.
Normally this library should work with Canon, Nikon, Olympus, Pentax, Sony and Minolta.
Please don’t forget to chose the mode of your camera where it will receive IR commands.
And also depending on the LED's you use, be sure to have the right resistance (mine are 3V 20mA)
The Arduino code maybe doesn't look perfect, but it's my first Arduino Code and project i did. :)
If there are some problems or questions or feedback, you can always contact me.


Have Fun


***Still in progress***

A 3D Scan