Thingiverse

3D Scanner

by Lindh3D

70 Downloads

61 Likes

0 Makes

After finding the source code to a 3D scanner turntable on the internet I decided to make my own design of a 3D scanner setup.

All credits for the source code goes to Whitney Potter for making the code.
Source Code can be found here
https://cdn.instructables.com/ORIG/F59/07PC/IJUCSTEF/F5907PCIJUCSTEF.zip
I have also included my sketch settings under thing files for you to download. The setting may vary depending on the gear ratio you choose to use.

Here is a list of the electronics you need to make this scanner.

Any Camera will work as long as you can set the ISO and EXP manually

A stepper motor with a driver like this one on eBay (28BYJ). Remember its week so you need to use bearings and nothing must touch anything else so the turntable is free from friction.
https://www.ebay.com/itm/1PCS-5V-Stepper-Motor-28BYJ-48-With-Drive-Test-Module-Board-ULN2003-5-Line-4-Pha/191877872096?epid=532472843&hash=item2caccff9e0:g:SY4AAOSwbPxXQBI3

Any Arduino will work but to fit t

3dscanner 3d print 3D Scan 3d scanned 3D scanner 3d scanning 3d sculpture Agisoft agisoft photoscan photogrammetry scan scanner shapespeare Whitney Potter 3dscanner 3d print 3D Scan 3d scanned 3D scanner 3d scanning 3d sculpture Agisoft agisoft photoscan photogrammetry scan scanner shapespeare Whitney Potter

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format