Slicer Discord
4" Long Range  – 3D printable model from Thingiverse Thingiverse
4" Long Range  – Bild 1 4" Long Range  – Bild 2 4" Long Range  – Bild 3 4" Long Range  – Bild 4 4" Long Range  – Bild 5 4" Long Range  – Bild 6

4" Long Range

524 Downloads
411 Likes
1 Makes
Go to Model
Hi Guys,
Here my 4inch long range FPV drone.

Its not designed for racing but "light" freestyle is possible.

I designed for long flying fun and cruising. It can carry easily a runcam thumb or similar...

Weight is about 220g. In my case i can fly 20min on two 18650 VTC6 cells.

You can build it under 200g !

- Motor: 1104 4300Kv or maybe 1405 4600kv
- Prop: 4024 Gemfan ( for the 1405 you can try 3blade)
- Fc: Mamba F405 MK2
- ESC: 15A 4in1 or 20A 4in1 Also you can use AIO FC, like Zeus10, but its designed for 20x20
- Cam: Caddx Ant
- VTX: standard cheap 20x20mm VTX of your choice
- RX: what ever you prefer ;-)
- GPS: Designed for BN-180
- Battery Mount for 18650 cells (2x)
- Battery: 2S ( 2x Quality 18650 cells like VTC6 3000mAh )


If you like you can Tip ;-)

Its for my friends the FPV RACING RODGAU


https://youtu.be/HGALtTy25zg

Source
Thingiverse
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
20 mm (Small)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection