4" Toothpick

4" Toothpick Frame in two versions, one with mounts and canopy for electronics i used,
or just the frame itself with mountingholes for 26.5x26.5mm FC.

Used electronics,
BetaFPV Toothpick FC 20a V3
BetaFPV custom. Eos2 fpv cam
BetaFPV A01 VTX
FrSky XM+ Rx
1407 3600KV Hglrc Flame ( mountingholes D12mm)
Dalprop 4045 two blade

How to build/what u need:

Using screws to connect carbon to printed parts is better if you have to change broken parts, using glue will save a bit weight but will cause problems when repairing.

* Parts/steps needed if you are using screws are marked like this

* All screw holes where the carbon rods are connected to the printed parts need to be cut a M2 thread, using a M2 steal screw to cut threads works great.

Motorscrews : 8x M2x8mm, 8x M2x7.5mm (make sure your screws dont touch motorwindings/ motor holes towards the FC are designed 0.5mm shorter)

* Fcmount + tpu shim + 4mm carbonpipe (picture): use the TPU-shim together with 4x M2x3.5mm