509 BW Patch - HueForge

509th Bomb Wing Patch as a HueForge! If you resize, just be sure to keep the original Z-value in order to keep layer-based color changes accurate! Project: 509BWLogo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.