Free Other STL Download - Print-in-place Cigars Box with fabric hinge and easy lockby Botcan3D

This print-in-place cigars/cigarettes box stores upto 24 standart size (83mmx7.5mm) cigars/cigartettes (such as MLBR Touch). It has a fabric hinge which can round the cover over the box. When the cover is pressed over the box, it's firmly clipped to the front sidewall, keeping the cover fixed on the box.As my printer's bed is 220x220mm (Ender 3 Pro), I designed the model to fit in these limits. I suppose, it cannot be down sclaled due to fabric elasticity problems but may be upscaled a little bit.Before first use, fold the cover up and down several times to soften the sticked fabric.Print settings which worked fine for me, are as follows:Material: PLAQuality: Standard (0.2)Wall line count: 2Top/Bottom layers: 3Infill: 20%Support/Build Plate Adhessions: NoneWith these settings it took 8:45 hrs for my Ender 3 Pro to print the model.After layer 15, I turned off the hotbed via CURA post processing settings. But may be becasue of that the corners of the box shrinked a little bit or may be becasue of working on the limits of the hot bed area. Nevertheless, the result is much better than my expectations and it works great.Smoking is dangerous to your health!