All In One 3D printer test

von Marián Trpkoš · Build a 3D Printer

0 Downloads

1.9k Likes

0 Makes

I decided to design All In One 3D Printer test, so here it is. This test includes : support test, scale test, overhang test, hole test, diameter test and bridging test. Print this with 100% Infill without supports. !NOTE! : If you are using Cura and you are experiencing missing text issue, be sure to enable "use thin wall" setting! (big thanks to CoreyNach for this!) We've just got over 5k likes border, THANK YOU ALL!!!! If you like me design and you find it helpfull, I am opened for a small tip (paypal : [email protected])!

3d scale test 3dprinter bridging Stringing overhangs 3DPrintertest @3d 3dtest scaletest 3d scale test 3dprinter bridging Stringing overhangs 3DPrintertest @3d 3dtest scaletest 3d scale test 3dprinter bridging Stringing overhangs 3DPrintertest @3d 3dtest scaletest 3d scale test 3dprinter bridging Stringing overhangs 3DPrintertest @3d 3dtest scaletest

Kategorie

Build a 3D Printer

Quelle

MyMiniFactory

Veröffentlicht

10.10.2018

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

keine Supports

Ohne Supports Einteilig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

All In One 3D printer test

Ähnliche Modelle

Zur Sammlung hinzufügen