Flexy Kangaroo & The Joey Print In Place No Supports – Modello 3D stampabile da MyMiniFactory

MyMiniFactory € Paid

Flexy Kangaroo & The Joey Print In Place No Supports – Bild 1

Flexy Kangaroo & The Joey Print In Place No Supports – Bild 2

Flexy Kangaroo & The Joey Print In Place No Supports – Bild 3

Flexy Kangaroo & The Joey Print In Place No Supports – Bild 4

Flexy Kangaroo & The Joey Print In Place No Supports – Bild 5

Toys & Games

Flexy Kangaroo & The Joey Print In Place No Supports

di Printverse · Toys & Games

0 Download

5 Likes

0 Makes

Vai al Modello

📦 𝗣𝗮𝗰𝗸 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀 🟣 Mama Kangaroo And Joey With 3MF File For Multicolor Print🟣 Kangaroo Head Features snap Fit Style.🟣 The Joey Is A Separate Part and Can Be Insertable in the Mama Kangaroo's Pouch.🟣I’ve Also Included An Alternate Head Option With Separate Eyes. It Doesn’t Change Much of Anything, But It Can Save You Around An Hour Or Two Of Print Time, So If You Prefer Printing The Eyes Separately (Or Just Like Having Options), It’s There For You ⚙️ 𝗠𝘆 𝗕𝗮𝗺𝗯𝘂 𝗦𝗲𝘁𝘁𝗶𝗻𝗴𝘀 & 𝗦𝘂𝗴𝗴𝗲𝘀𝘁𝗶𝗼𝗻𝘀 (𝗨𝘀𝗶𝗻𝗴 𝗕𝗮𝗺𝗯𝘂 𝗫𝟭𝗖) 🖨️ 🧱 Wall Count – 4 (For Maximum Strength 💪)📏 Layer Height – 0.2mm🚫 No Supports Needed📉 Minimum Downscaling – 48% Of The Original Scale🟦 Outer Brim – ON (For Maximum Adhesion 🔒)🎯 Adaptive Layer At Max – Recommended for Single-Color Prints for Better Quality, especially when printing smaller parts ✨⚠️ For Multicolor Prints, Adaptive Layers may significantly increase print time ⏳⚙️ Rest of the Settings – Defaults💚 Bambu 3MF Files Included for Bambu Users 💚!!! 📲 𝗙𝗼𝗹𝗹𝗼𝘄 𝗨𝘀 👇🏻 🎵 TikTok – tiktok.co

print animal australia support toy flexible kangaroo articulated in link no flexi place flexy joey printverse print animal australia support toy flexible kangaroo articulated in link no flexi place flexy joey printverse print animal australia support toy flexible kangaroo articulated in link no flexi place flexy joey printverse

Categoria

Toys & Games

Fonte

MyMiniFactory

Pubblicato

01.02.2026

Cosa serve per stampare: Principiante Bassa affidabilità

Perché?

design print-in-place · 2 colori

Print-in-place 2 colori / AMS

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file

STL

Materiale

PLA

Colori

2 (AMS/MMU consigliato)

Software

Cura, PrusaSlicer o simile

Ancora nessuna valutazione

Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti

Flexy Kangaroo & The Joey Print In Place No Supports

Modelli simili

Aggiungi alla collezione