Phil the Articulated Lil Chill Pill Complete w/ Bottle & Child Resistant Cap + RX Advertisement Board

For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. You will find 4 different 3mf files, one for each design. I saved them this way since I used different settings for all 4 parts all defaults settings with the following exceptions..... Chill Pills were printed at a 0.12mm layer height due to the small size of these articulated figures. I also enabled the smooth adaptive layer for a smoother top face. (Due to the small size proper bed adhesion and a finer printer resolution are highly recommended. )Chill Pill Bottle was printed with slower inside and outside walls for a shiner, more translucent bottle.Chill Pill Bottle CR Cap was printed with supports and an inner and outer brim. Note: The 3mf file contains supports that were manually removed from internal workings of the CR Cap. (If you are using the stl file you can print the cap with NO Su