Tank the Triceratops Flexi

STL/3MF Multicolor ***Also available in the welcome folder of Patreon/MMF tribes Regular eyes/ 6mm eye sockets 2 Part : Head and body   Print Settings: Print in 2 parts No Supports needed Arachne walls 2-3 walls 5-10% infill Test printed down to 70% YMMV   The heads will need to be heated up to fit over the ball on the neck. Set your printer’s heat bed to 65C, lay the heads on it for a few minutes and then pop them on.     If you have adhesion issues, try a brim, glue stick or Aquanet hairspray