Thingiverse
AA Battery
von themauxfaux
69
Downloads
73
Likes
0
Makes
I came across a snag with my external camera flash when designing the Rotobooth (my flickr photobooth). The flash, a Canon 430ex, does not have a DC power option (the ability to plug into an external power source). This would require the four AA batteries to be swapped out approximately every 200 photos.
As a work around, I cut a wooden dowel to size to make two false batteries to charge the capacitor. Voltage was easy to determine – 4 × 1.5 Volt batteries = 6VDC. Next I connected a bench power supply to watch the current draw (amperage). This determines how quickly the flash will charge.
As a work around, I cut a wooden dowel to size to make two false batteries to charge the capacitor. Voltage was easy to determine – 4 × 1.5 Volt batteries = 6VDC. Next I connected a bench power supply to watch the current draw (amperage). This determines how quickly the flash will charge.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
