Abduction 2

They came. They saw. They pigged outAbduction 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 130x230.89mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mm HueForge! Paint with filaments based on Transmission Distance Swap Instructions: Start with Black At layer #11 (1.04mm) swap to Red At layer #17 (1.52mm) swap to Gold (Yellow) At layer #23 (2mm) swap to White for the rest. Filaments Used: PLA+ Inland Black Transmission Distance: 3 PLA+ Inland Red Transmission Distance: 3.6 PLA+ Inland Gold (Yellow) Transmission Distance: 8 PLA+ Inland White Transmission Distance: 2.5This print uses 4 unique filaments