ACE Overhead Mount Top camera

This is a camera mount for the Ace Overhead Mount. It mounts on the underside of the top plate. The camera angle is adjustable by means of a rotating ball joint. Two camera bodies are provided. One that can be secure with no. 8 screws and another with a M6 bolt and nut about 1.5 inches long. The camera housing and ball joint from my side mount or my adjustable camera are interchangeable with this camera. The bolt and mount are not. The housing is a tight fit. You have to insert the camera module at an angle to get it past the top notch. Insert it at an angle with the lower end being the side opposite the opening. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT AND AFFILIATE CODES FOR PRINTER AND FILAMENT I am continuously trying to get discount codes from various manufacturers. Unlike many affiliate links these give discounts on purchases and are more difficult to obtain. In my requests I ask that they give me the codes with the most discounts for users even if it means a smaller commission.   HOW TO USE THE CODES 1.      You need to CLICK ON THE AFFILIATE LINK. The links are usually set up by countries/regions. 2.      Add the items you want to purchase 3.      Enter the DISCOUNT CODE at checkout. The codes vary by month and saving – so check back each month for the latest offers. 4.      You can only use ONE CODE so be certain to enter the one with the most discount  ANYCUBIC – June 26th to August 31 2026 United States - US site AFFILIATE LINK (CLICK THIS 1ST): https:/