ACTION Moodlight

This is a new housing for the LSC Smart Moodlight, currently sold at ACTION for €9.95. Tools Required:Phillips screwdriverPliersSoldering ironDesoldering pump (or something similar)Materials Required:5 jumper wires, approximately 3 cm longGlue (I always use REVELL CONTACTA, a slow-drying glue that allows repositioning)Assembly:Remove the front lens. It can easily be taken off with a butterknife or a flathead screwdriver.Unscrew the LED board.Unscrew the control board.Desolder the buttons and microphone from the control board.Solder the LED board to the control board using the jumper cables.IMPORTANT: Check functionality (I fried a board after mistakenly creating a short).Install the plugged-in control board into the stand.Screw in the LED board.Glue the lower and upper parts to the stand.