Adimlab 3D Printer LCD & PCB Control Box

This control box could be used with other printer's with some mods for the control board hole positions and the LCD panel to make it fit.

This is a well ventilated control box to fit both the LCD panel and the PCB board, but not the power supply. It's made to sit on the side of the printer and will be a good platform for a spool holder. The Adimlab i3 Gantry printer has two different controller boards, a black board and a white board, but they have the same hole layout so this will fit either version of the Adimlab i3 Gantry printer.

To use this control box you will need to remove your PSU from your controller. A lot of Adimlab folks are using the PSU covers from cmelson here: https://www.thingiverse.com/thing:3363632

You will also need to raise your printer up higher using some feet. Use my design here: https://www.thingiverse.com/thing:3592374 or search under Adimlab or printer feet.

Unlike the OEM Adimlab printer, the board is to be mounted with the components ri