Thingiverse
Adjustable angle mount for Rigidbot LCD panel
by racatack
65
Downloads
39
Likes
2
Makes
No more bending over to read the display - angle it up!
Print four pieces of the basic part/bracket. Press a 6-32 nut into the hex socket on two of them and mount those to the LCD panel with M3-8mm screws. The nuts should face inward (toward each other.) Mount the other two brackets on the Rigidbot plastic front panel with the empty nut cavities facing out.
Use a 6-32 screw from each side to join the LCD brackets to the front panel brackets.
The screw holes are deliberately undersized and need to be cleaned up with about a 9/64" drill.
Printing with the nut cavity facing the build plate worked best for me.
Print four pieces of the basic part/bracket. Press a 6-32 nut into the hex socket on two of them and mount those to the LCD panel with M3-8mm screws. The nuts should face inward (toward each other.) Mount the other two brackets on the Rigidbot plastic front panel with the empty nut cavities facing out.
Use a 6-32 screw from each side to join the LCD brackets to the front panel brackets.
The screw holes are deliberately undersized and need to be cleaned up with about a 9/64" drill.
Printing with the nut cavity facing the build plate worked best for me.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
