Adjustable Drill guide with stop and elements

HeyhoHere I have a drill guide for you.I tried to make it as versatile as possible. You can change the core elements to fit them for other drill sizes or if they show wear and tear.I tried to make as many parts as possible printable. But still you will need:1 x piece of Filament (I used PETG), 1 x M5 Nut and 1 x M5 x 35+ mm Screw. All in all this Design is intended as an aid. Of course, you still have to try to keep the drill fairly straight, as there are always tolerances in the printed parts.Print Instructions:I would highly recommend to use temperature resistant material for the core elements. In my tests PETG worked fine (4 Perimeter). Don't worry if they don't fit perfectly to the drill at first. The drill will widen it for a perfect fit :P.For the other parts I used PLA with 25% Infill, 3-4 Perimeter.Make sure there is no seam at the marking guides. Also I highly recommend to only print this design with a tuned in 3D printer. Since big tolerances have a direct impact on t