Adjustable Flag Pole

__Materials Used:__
- Rope (6mm thick 7m long) loop made with the fastener closed with 4 M3 bolts and nuts
- Two broomsticks (23mm thick 1.5m long) connected with a non-bendy tube and a nail into each one
- Mounted to the fence with (5mm thick 25mm long) wood screws and two scrap wood boards as a spacers
- Pulley system held by 2 screws for each pulley part, one should be enough on the bottom one and use a screw on the top one from above and on the side preferably a nail

I made this for the Israeli independence day.
The flag is held from three 3D printed rings by zip ties (“flag_zip_tie_ring.stl”), and can be replaced easy or lowered down to “half mast” on memorial days and as a symbol of respect, mourning and distress.

__“top_pulley_system_+IL_Flag.stl”-__
If you want a (different) flag on the top pulley system like in “top_pulley_system_+IL_Flag.stl”, find a CLEAR photo of it, convert to an svg file (I use https://convertio.co/jpg-svg/), go into your CAD modelling softwar