Adjustable GPU holder

Adjustable support to prevent a heavy video card from bending due to the weight and being destroyed. Video card support with LED lighting. Can be assembled in up to 5 colours due to the separate parts. The "window" is printed in transparent material on the front. Designed with a rubber disc for the bottom. The LED strip can be fixed to the inside with a double-sided adhesive strip. The rod can be snapped together, it does not need to be glued together, but it must be glued to the base. There are two versions of the horizontal adjustable bracket, please see the seventh picture. The rod can be used as you like with the led strip going in at the top or the bottom depending on how you rotate. 14-15 cm LED strip is enough. Plus wire to motherboard connector. For the horizontal support it is recommended to allow the support because of the hole, otherwise it is not necessary. PETG is recommended, PLA is not.