ADJUSTABLE KOBRA-3 CAMERA MOUNT

IF THE FIT IS TOO TIGHT I HAVE ADDED A MODEL WITH A LARGER HOUSING WHICH SHOULD SOLVE THIS ISSUE. CLICK FOR LINK This is an improved camera mount for the stock USB Anycubic Kobra-3 camera. It attaches to the Y-axis with a screw in the same way as the stock camera model The camera angle can be adjusted by means of the ball joint and is easier to print. The camera mount also has a cable guide for the USB camera wire. Tolerances are tight as some parts are press fit. I recommend using PLA. The housing is a tight fit. You have to insert it at an angle to get it past that top notch. Insert it at an angle with the lower end being the side opposite the opening. Assembly is very easy and self-evident. 3d Printing A Print profiles is included. Tolerances are tight as some parts are press fit. I recommend using PLA Minimal support is required. I recommend you use the print profile. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT AND AFFILIATE CODES FOR PRINTER AND FILAMENT I am continuously trying to get discount codes from various manufacturers. Unlike many affiliate links these give discounts on purchases and are more difficult to obtain. In my requests I ask that they give me the codes with the most discounts for users even if it means a smaller commission.   HOW TO USE THE CODES 1.      You need to CLICK ON THE AFFILIATE LINK. The links are usually set up by countries/regions. 2.      Add the items you want to purchase 3.      Enter the DISCOUNT CODE at checkout. The codes var