Adjustable monocular microscope clamp/bracket

Designed to fit one of the many monocular lens assemblies available from Asia with digital cameras on top. Used in conjunction with a pretty standard Volcano monitor stand to provide the reticulating arm to clamp this assembly onto. You can probably use any other similar monitor arm. Files provided in STEP format as well so if you need to make changes it should be easier.

There are 2 models with different carriers. One grips the lens on the narrower 39mm part(non standard), and one that grips the lens lower down on the more standard 50mm section of the lens.

A single model is supplied which you will need to split into parts after importing it into the slicer. In Bambu slicer you can right click on the part -> split -> to objects. Don't forget to duplicate the knob in the slicer, you will need 2 of them :)

I have only tested the 39mm carrier as I only realised afterwards that the 50mm segment is standard and that it would be hard to alter, even with the STEP file, without changing t