Adjustable Nerf Scope

Made this for my dart zone spectrum because the one it came with was disappointing. Made a picatinny base for it too. Tried to use the simplest design possible and it works as well as I need it to for a little flywheel blaster like the spectrum.

You will need 3 m4 screws, 2x 15mm and 1x 13mm (I just cut one down to size). And 3 nuts too. I used UV resin to secure the screws into the adjustment knobs, I'm sure superglue would work just as well, you'll need superglue anyway as some parts need to be glued. I used a 4x25mm slotted metal pin for the rear hinge but anything 4mm diameter and 25mm or more should work.