adjustable spool shelf

This shelf is unique in that there are 18 different holes to choose from to hold your spools on the wall, i have tested it out with both a 1inch PVC pipe and a 1 inch wood dowel. If you decide to use a PVC pipe you need to print the Middle holder, if your decide to use steel pipe or wood it is optional. I chose the PVC because it was 5 ft long for 3.99 each at Menards compared to the 5.99 wood Dowels that are only 4 ft long. you can also use the 10ft pipes as well just be aware you will need to print more holders to keep it from bending. I am also going to be printing one more once I buy more PvC to expand the shelf ( look at last photo) just simply move your next tubes to unused hole on one end to save from printing extra pieces and to expand shelf! I used a total of 6 #6 1 ¼ button style sheet metal screws to hand shelf. if your decide to use PVC pipe ensure the outside diameter is 1 inch, the pvc I bought is ¾ PvC pipe and the inside diameter is ¾ and outside is 1inch