AHTS Vessel (Floatable)

This is a floating bathtub Offshore tugboat, it can be used for display or for playing in the bath tub. However, the boat requires variable infill to float upright. Please adhere to the following settings for best performance. (3 Walls provide better watertightness) AHTS - Body: 3 walls, 0% InfillAHTS - Bottomhull: 10% Infill (Cubic) , but use the “Modifier” to set infill of specific part to 100% (Rectilinear) (There is a photo)The rest: these are decorations and shouldn't matter too much Use the connector pins to connect the BottomHull to the Body Enjoy Printing! (If you want to edit this model, here is the onshape link: https://cad.onshape.com/documents/15d8d487781631580b225d4e/w/40015c332852b3f451e277ec/e/44700bbdf753c214e4b45bba)