All Might Hueforge Hexagone

Voici All Might pour votre décoration murale ;) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5.6 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White for the rest.