All Seeing Turtle

The All-Seeing Turtle has arrived… and it’s watching EVERYTHING. Thank you: DragonFire, NerdiStitcher, and Sam for the wonderful pictures. This one was a true test. NOTE: The one with the 5 eyes will require some patience...slow down your out wall acceleration to 2000, and adjust the zhop or zlift (Prusa) to at least .4, possibly .6. Plus, you need to have a very clean bed plate and utilize a glue of your choice possibly. I do not recommend shrinking the 5 eye. I was able to get it to fully print at around 90% but it took some decent adjustments. The two-eyed version is much more forgiving. I still recommend adjusting your zhop or zlift, slowing acceleration on the outer wall, and making sure that your bed plate is really clean. Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results. Printing Recommendations: Initial layer and initial fill: 25 mm/s z