Android 18 Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm The Model is 135x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Marine Blue Transmission Distance: 2PLA BambuLab Basic Red Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #13 (0.6mm) swap to Marine BlueAt layer #15 (0.68mm) swap to RedAt layer #22 (0.96mm) swap to Jade WhiteAt layer #34 (1.44mm) swap to YellowAt layer #36 (1.52mm) swap to Jade White for the rest. Post pictures of your Remixes!!!!