Thingiverse
Anet A6 Raspberry Pi Case Bracket
di mrubesch
3
Download
1
Likes
0
Makes
A bracket to mount [0110-M-P's Raspberry Pi case](https://www.thingiverse.com/thing:922740) on the upper left corner of the Anet A6 frame.
The curved slot opening attaches to the screw for the little stop that held down the z axis bar. The other hole attaches to the screw holding the top left corner of the frame.
Requires a longer (M3 x 20) screw to replace the top left frame screw. The z axis bar stop screw is reused. Requires four M3 x 10 screws to attach the case to the bracket.
Various thicknesses are probably overkill, but I wanted to leave airflow space for the bottom of the Pi, and I was going for quick and dirty in my 3D drawing.
The curved slot opening attaches to the screw for the little stop that held down the z axis bar. The other hole attaches to the screw holding the top left corner of the frame.
Requires a longer (M3 x 20) screw to replace the top left frame screw. The z axis bar stop screw is reused. Requires four M3 x 10 screws to attach the case to the bracket.
Various thicknesses are probably overkill, but I wanted to leave airflow space for the bottom of the Pi, and I was going for quick and dirty in my 3D drawing.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
