Thingiverse
Angle Translator
von wrthg
60
Downloads
43
Likes
0
Makes
In my day to day I always come across surfaces where the angle is hard to obtain. I wanted a quick way to obtain and translate angle measurements and still have the device fit in my tool box or pocket.
How do i use the angle translator?
- Simply open the tool until both halves are resting firmly on the two surfaces you wish to measure.
-Remove the tool and use the top edge of the top half and the bottom edge of the bottom half to translate the acquired angle onto paper, wood or metal. Any surface really.
How do I assemble the angle translator?
- Clean off any support material until the two parts fit together. I use a 8-32 shoulder bolt with a length of 45mm and a matching nut to mate the two sections. Thread the bolt through and insert the nut. Simple.
How do i use the angle translator?
- Simply open the tool until both halves are resting firmly on the two surfaces you wish to measure.
-Remove the tool and use the top edge of the top half and the bottom edge of the bottom half to translate the acquired angle onto paper, wood or metal. Any surface really.
How do I assemble the angle translator?
- Clean off any support material until the two parts fit together. I use a 8-32 shoulder bolt with a length of 45mm and a matching nut to mate the two sections. Thread the bolt through and insert the nut. Simple.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
