Anonymous

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 204.92x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GrayAt layer #13 (1.12mm) swap to White for the rest.