Anycubic ACE Pro Buffer Guide

Anycubic ACE Pro Buffer Guide — designed to improve PTFE tube alignment with the ACE Pro filament buffer and reduce feeding errors caused by the limited travel of the buffer mechanism due to angled PTFE tubing. This helps prevent filament tangling, rollback, or extrusion errors.Printing:Print vertically with supports for the best fit and dimensional accuracy.Installation:Attach the buffer guide to the rear of the buffer cover using two M3×16 mm self-tapping screws.Note: Some newer ACE Pro units do not have pre-drilled holes in the cover. In this case, drill two 2.5 mm holes for installation.Attach the buffer guide cover to the base using two M3×12 mm self-tapping screws. Ensure the end with the smaller half-circle faces outward to minimize friction during filament buffer movement.