Thingiverse
Anycubic Mega Zero - Mini Satsana
15
Downloads
19
Likes
0
Makes
Remix to fit the Anycubic Mega Zero 1.0 & 2.0.
Added a slot for the wires of the front fan and a rib to hold/ move the wires of the hotend away from the heatsink.
Adjusted the front fan air tunnel so that it is more directed towards the heatsink.
Changed some parts so that it can be printed with minimal supports.
Recommended to use Tree supports, Touching buildplate and 75 degrees Support Overhang Angle.
==
If you want to use a 5015 fan instead of the stock 4010 fan, you can use an adapter like this one: https://www.thingiverse.com/thing:5381580
If you want to use a Direct Drive system, you can use this mount: https://www.thingiverse.com/thing:4841439. See attached photo.
==
**Update 26-04-2023: Made a version for dual 4010 parts fans, see "AMZ-Mini_Satsana-Main-body---Dual4010---Rev01.STL" upon request of @Elvanio in the comments. Please note that this version has not been tested yet.
Added a slot for the wires of the front fan and a rib to hold/ move the wires of the hotend away from the heatsink.
Adjusted the front fan air tunnel so that it is more directed towards the heatsink.
Changed some parts so that it can be printed with minimal supports.
Recommended to use Tree supports, Touching buildplate and 75 degrees Support Overhang Angle.
==
If you want to use a 5015 fan instead of the stock 4010 fan, you can use an adapter like this one: https://www.thingiverse.com/thing:5381580
If you want to use a Direct Drive system, you can use this mount: https://www.thingiverse.com/thing:4841439. See attached photo.
==
**Update 26-04-2023: Made a version for dual 4010 parts fans, see "AMZ-Mini_Satsana-Main-body---Dual4010---Rev01.STL" upon request of @Elvanio in the comments. Please note that this version has not been tested yet.
Calvin_MegaZero also publishes on
2 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
