Arc Lamp for LED Stripes, Customizable

An Arc Lamp (Arch Lamp, Bridge Lamp) for LED Strips designed for easy customization and durability. It can fit a diffuser (printable) for better light distribution.

It is printed in 10 parts (8 arc segments and two feet) and printing takes very roughly 90 hours with a 0.4mm layer thickness (it takes roughly 1kg of filament to print it). For stability i decided to print the foots with 3mm wall thickness, but that is probably a bit of overkill.

**This is a elaborate and long print, so THINK for yourself, MEASURE for yourself, and have a plan in your mind how to build it BEFORE you start printing.**

Apart from the printed parts you need M3x10mm and M3x12mm Allen wrench screws (And fitting nuts), Spax screws if you choose to screw the lamp onto your table, and if you want a diffuser foil up to 0.4mm thickness.
The Allen wrench makes it much easier to assemble due to the confined space.

For the LED strips make sure you get ones that fit your application, for general use i would