Thingiverse
Arrowhead Box
von CodyDoodles
14
Downloads
9
Likes
0
Makes
UPDATE: I printed this at .28 resolution and barely any of the arrowhead details printed....so I filled in the void on this one with some nail polish. Therefore, I would recommend printing at a high resolution for best results.
This is simply a personalized remix of the Small Parts Storage Box (increased to 130% the original size).
How I do it: Print the hinges/latch file @ 75% infill, then print the top and bottom @ 15% infill with a high amount of walls (to ensure where the latch/hinges attach is sturdy enough)
REQUIRED to Complete Assembly = M4 x 30mm bolts, M4 lock nuts
Quantity = 6 bolts, 6 nuts
(M4 x 35mm bolts would probably work better, but I haven't tried to find them yet because the 30mm are working fine)
I've had issues with where the hinges/latch attach, so I print with a high number of walls (5 using profile:magic.28 for the BOTTOM) and 15% infill.
Enjoy! This is one of several remixes of this box I have created. Check the others out if you're i
This is simply a personalized remix of the Small Parts Storage Box (increased to 130% the original size).
How I do it: Print the hinges/latch file @ 75% infill, then print the top and bottom @ 15% infill with a high amount of walls (to ensure where the latch/hinges attach is sturdy enough)
REQUIRED to Complete Assembly = M4 x 30mm bolts, M4 lock nuts
Quantity = 6 bolts, 6 nuts
(M4 x 35mm bolts would probably work better, but I haven't tried to find them yet because the 30mm are working fine)
I've had issues with where the hinges/latch attach, so I print with a high number of walls (5 using profile:magic.28 for the BOTTOM) and 15% infill.
Enjoy! This is one of several remixes of this box I have created. Check the others out if you're i
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
