Articulating Raspberry Pi Camera Mount cover with ring light

NB: You might want to print this with something like PETG or a higher temperature capable material. This will help to prevent warping from the heat of the LED ring.

I use an enclosure for printing, so the light levels aren't great, I have a strip of LEDs mounted to the top of the enclosure, but whatever is being printed is pretty much in shadow because of the extruder. Now with this part, I can finally see what is being printed!

This is a modified face plate for the Articulated Raspberry Pi Camera Mount that houses a ring of LEDs, I have tested it with a ring of 16 Neopixels, available from [Adafruit](https://www.adafruit.com/product/1463), and a 12 LED ZIP Circle, available from [Pimoroni](https://shop.pimoroni.com/products/zip-circle-12-zip-leds).

I would personally recommend getting one of the RGBW Neopixel rings, as it means you can get a nice natural white light instead of the slightly more blue light that you get when you run the RGB LEDs at full tilt to get a white col