Thingiverse
Assembly Cube
door TimeFramed
17
Downloads
7
Likes
0
Makes
Cube than can be used to assemble perpendicular pieces.
The holes go all the way through, and are offset so that a screw can be put into each hole (it can be used in a box corner).
The holes were sized so that a #8 screw will "bite" securely without cracking the cube. However I found that some of the cubes I printed were cracking, so now I drill out the holes with a 5/32 bit. The screws fit much more loosely, but still bite the threads sufficiently.
They are also countersunk so that a "deck mate" type screw head will sit (nearly) flush. For that purpose, I drill out the hole larger so that the screw passes through freely, and anchors into the surface behind.
The holes go all the way through, and are offset so that a screw can be put into each hole (it can be used in a box corner).
The holes were sized so that a #8 screw will "bite" securely without cracking the cube. However I found that some of the cubes I printed were cracking, so now I drill out the holes with a 5/32 bit. The screws fit much more loosely, but still bite the threads sufficiently.
They are also countersunk so that a "deck mate" type screw head will sit (nearly) flush. For that purpose, I drill out the hole larger so that the screw passes through freely, and anchors into the surface behind.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!